Salesforce to HubSpot migration cost depends far more on what you have to move than on the two platforms themselves. A 10-seat team in Raleigh with a clean contact list and three simple integrations has a very different job from a 150-seat business with custom objects, years of activity history and automation wired into its accounting system. Both get called a migration, which is why published numbers look so unreliable. This article gives you a worked budget to use before you talk to any partner, Eskore included.
Two rules for reading it. Every published figure is a third-party estimate, not a quote, and all money is in US dollars. The arithmetic uses stated assumptions, not confirmed HubSpot prices. Eskore does not publish migration prices. Our fixed price is set after a scoping call, once we have looked at your data.
Salesforce to HubSpot migration cost: typical ranges by scope
The published bands are wide because they describe different jobs. They come from third-party cost guides of the kind that Huble, Noboundsdigital and Elefante RevOps publish. Each guide defines scope differently, and none of them can see your data. Read the bands as a bracket, not a budget.
| Scope | Published range (USD) | Basis |
|---|---|---|
| Basic move: leads, contacts, accounts and opportunities | $10,000 to $25,000 | Third-party estimate |
| Mid-market, partner-led project | $15,000 to $50,000 | Third-party estimate |
| Custom objects with complex associations | $40,000 to $100,000 or more | Third-party estimate |
Vendor figures sit on a different basis. Penguin Strategies adds a flat $25,000 to its build cost for leaving a legacy system such as Salesforce. That is a vendor estimate for the build, and it excludes HubSpot licence fees.
Why the spread is so wide
The same label covers very different work. Moving 10 seats of deals and contacts with three integrations to rebuild is one job. Moving a 200-user instance with custom objects, years of history and automation spread across the account is another. Partners price each one, and they often define "migration" differently.
Scope sets the number, not the tool. HubSpot and Salesforce are the same products whether you move 10 seats or 200. What changes is how much of your business logic lives inside Salesforce and how many other systems depend on it.
When you compare quotes, ask each partner what is in and what is out. A low number usually means something has been left off the list. Ask specifically about the audit, custom objects, reports, automation, parallel running and HubSpot's onboarding charge.
Five cost drivers that move the total
Five things move the total more than anything else. Each one comes with a question to answer in the audit.
Custom objects. Usually the largest single driver. Question: how many custom objects do you have, and how do they link to each other?
Integrations. Every tool that reads or writes CRM data has to be reconnected and tested. Question: what connects to Salesforce today, and who owns each connection?
Automation. Workflows, assignment rules, sequences and approvals do not transfer as data. Question: which automations would the business notice within a day if they stopped?
Data quality and history. Duplicates, stale records, missing owners and years of activity all add work. Question: how much of the data has been touched in the last 12 months?
Reporting and quoting. Dashboards, forecasts and quote documents with pricing rules all need rebuilding. Question: which reports does leadership open every week, and which quotes must match your pricing logic exactly?
Custom objects and associations
Custom objects and the relationships between them are usually the costliest part of a migration. Smart Transfer, HubSpot's built-in migration route, does not carry Salesforce custom objects across, according to published guides. Check the current HubSpot documentation before you plan around it. Either way, the objects have to be rebuilt as HubSpot objects and properties, or moved through a custom approach.
The cost depends on count and complexity. A simple lookup field is quick to rebuild. A web of many-to-many relationships, each with its own rules, is not. If your data model is that intricate, a bespoke build may suit you better than forcing it into HubSpot. Our custom software development for CRM builds work covers that route.
Integrations and automation
Most firms have more connections than they realise. Accounting, website forms, phone systems, email tools and automations built in Zapier, Make or Twilio are common. Each one needs mapping, testing and often a rewrite, because field names and data formats differ between systems.
Automation is the part people underestimate. A Salesforce flow that routes leads by postcode is a rule, not data. It has to be rebuilt and retested in HubSpot or in an external tool. If you want that logic rebuilt as part of a wider workflow, our AI automation team can scope it alongside the migration.
Data cleanup and history
Cleanup is where budgets slip. Planning assumption: if cleanup and customisation are discovered mid-project, first-year cost can run 30 to 50 percent past the first estimate. That is a planning rule of thumb, not a measured statistic. An audit before pricing is the way to avoid needing it.
History is a separate decision. Carrying every activity and email since 2015 takes far more effort than carrying the last 24 months, and you may not need the older records at all. Decide which history matters for reporting and attribution before anyone writes a mapping. Then budget for that and nothing more.
Decide too what personal data you carry across and how long you keep it. That is a legal question as well as a cost one, and this article makes no compliance claims. Take advice on it before cutover.
Don't agree a fixed price until the data has been audited. Our guide to fixed price custom software development covers how change requests are handled once a price is agreed.
HubSpot licence maths for 10, 50, 150 and 200 seats
The recurring cost is the seat fee, and it usually outlasts the migration. Use this formula:
Annual seat cost = seats × monthly seat price × 12
Year-one cost = annual seat cost + one-time onboarding fee
The table uses two assumed inputs: a $100 monthly seat price and a $1,500 onboarding fee. They are placeholders that make the sums easy to follow, not confirmed HubSpot prices. It assumes one edition throughout, Sales Hub Professional.
Sources disagree on the inputs. Featurebase lists Professional at $90 per seat a month billed annually, or $100 billed monthly with an annual commitment. Sybill lists Starter at $15 on annual billing where other sources say $20. Check HubSpot's Sales Hub pricing guide and HubSpot's own pricing page before you budget.
Take a hypothetical five-seat sales team in Austin at the placeholder price. Five seats at $100 is $500 a month. Multiply by 12 for $6,000 a year, then add the $1,500 onboarding fee. Year one comes to $7,500.
| Seats | Annual seat cost | Year-one total | Three-year total |
|---|---|---|---|
| 10 | $12,000 | $13,500 | $37,500 |
| 50 | $60,000 | $61,500 | $181,500 |
| 150 | $180,000 | $181,500 | $541,500 |
| 200 | $240,000 | $241,500 | $721,500 |
The three-year total is three years of seat fees plus the one-time onboarding fee. It assumes the seat count and price stay flat.
Replace the placeholder with the monthly price you confirm, and the table moves in a predictable way. Each $10 per seat per month changes the annual cost by 12 times the seat count times $10. That is $1,200 a year at 10 seats, $6,000 at 50, $18,000 at 150 and $24,000 at 200.
At 50 seats, three years of seat fees come to $180,000 at the placeholder price. That is well above the migration bands, so the seat price is the number to get right first. A hypothetical 50-seat operations firm in Denver should treat it that way.
At 200 seats the licence line is still the largest recurring cost, but the migration scope grows faster. A business that size usually has more users to train, more reports to rebuild and more integrations to test. Expect the audit to take the most time there.
Pricing pages can differ by region. If you run operations in the UK, UAE, Australia or Singapore, check the pricing page for your country before you budget. Our figures are in US dollars. Canadian readers in the GTA should convert at a dated, sourced rate, and we have not shown CAD figures here.
Edition and tier changes can matter more than the migration fee
Moving up a tier, or needing features that only sit in a higher edition, can outweigh the one-off migration cost over three years. The arithmetic is simple. For 10 seats, every $10 per seat per month of difference adds $1,200 a year, or $3,600 over three years. For 50 seats, the same difference adds $6,000 a year, or $18,000 over three years.
Onboarding fees also differ by edition. Published figures put them at $1,500 for Sales Hub Professional and $3,500 for Sales Hub Enterprise. Confirm both on HubSpot's pricing page before you use them. Choose the edition by the features your process needs, not by the quote for the move.
Hidden costs: overlap, rebuilds, reports and admin time
Most budgets capture the migration fee and little else. The rest of the true cost sits in the table below.
| Hidden cost | Why it appears | How to size it |
|---|---|---|
| Parallel running | Teams run both systems to reconcile numbers before cutover | Budget placeholder of $8,000 to $12,000; size it from the length of the parallel period |
| Rebuilt reports and dashboards | Salesforce reports do not carry across as logic | Count the reports leadership opens each week |
| Rebuilt automation | Automation logic does not transfer as data | Count workflows, sequences and assignment rules |
| Internal admin hours | Operations and sales-ops staff handle mapping, testing and sign-off | Estimate hours per person per week for the project |
| Reconnected integrations | Each tool needs a new connection and testing | Count connections in the audit |
| HubSpot onboarding | One-time fee that depends on edition | Confirm on HubSpot's pricing page for your edition |
The parallel-running figure is a planning placeholder, not a published quote. It is the cost most often left out, and it grows with every week both systems stay live.
A partner's implementation fee does not automatically replace HubSpot's onboarding charge. Ask any partner, including us, to state in writing whether HubSpot's onboarding fee is included or billed separately. Without that line in the quote, you can end up paying twice for the same step.
How long a Salesforce to HubSpot migration takes
Published estimates disagree. Some put a Salesforce move at 4 to 8 weeks, others at 8 to 14 weeks. We will not pick one, because the spread is real. It comes from three things: how clean the data is, how many custom objects there are, and how many integrations need rebuilding.
For planning, we use two bands. A small, clean move with few integrations sits near the 4 to 8 week end. A move with messy records, custom objects and several integrations sits at 8 to 14 weeks or longer. These are scheduling assumptions, not measured averages.
Cleanup usually sets the critical path. It runs before mapping and migration, so a slow audit or messy data pushes everything after it. Plan the cleanup time before you plan the build.
For comparison, JayOh's cost and timeline guide puts a move from Pipedrive, Zoho or similar to HubSpot at 3 to 6 weeks and $6,500 to $20,000. Most of the gap between that and a Salesforce move comes from the Salesforce data model and its automation.
Phases of a typical migration
- Discovery and data audit. Establishes the scope the fixed price depends on. This is where the audit line in your budget sits.
- Data cleanup. Remove duplicates, standardise fields and archive history you will not carry. Usually the most variable phase.
- Architecture and mapping. Decide how objects, fields, pipelines and associations translate. Custom-object decisions are made here.
- Build and integrations. Rebuild automation and reconnect tools. This drives the integration and automation lines.
- Test migration. Load the full dataset into a test environment, check record counts and spot-check key accounts.
- Parallel run. Both systems stay live for an agreed period. This drives the overlap cost.
- Cutover and hypercare. Go live and support the team through the first weeks, including onboarding.
Can you migrate yourself with HubSpot's native tools?
For a simple data model, partly. HubSpot offers CSV import, and a native Salesforce sync can bring records across. That covers contacts, companies and deals.
The limits matter more than the strengths. Native tools do not carry automation, reports, custom logic or most custom objects. You rebuild all of those by hand, and that is where the cost sits.
One step-by-step Smart Transfer guide says only Super Admins can run Smart Transfer. Confirm that against HubSpot's documentation before you assign the task to anyone.
Attribution is the risk people miss. Campaign sources, first-touch data and activity history may not map cleanly. If marketing loses the link between channels and revenue, rebuilding that picture can be slow and costly. Permissions also need mapping, so access does not end up looser than it was.
Doing it yourself works when the data model is simple, there are few integrations, and one person can own the project for several weeks. If any of those conditions fails, budget for a partner.
When staying on Salesforce costs less
Sometimes the honest answer is to stay. Three situations point that way.
First, the team relies heavily on Salesforce-specific functionality, such as advanced reporting, complex approvals or AppExchange tools with no HubSpot equivalent. In that case, staying can cost less than migrating.
Second, the switch saves on licences, but the rebuild costs more than the saving over the period you care about. Work out the annual saving, subtract the one-off cost, and look at three years rather than twelve months.
Third, the process is not ready to change. Moving a broken process into a new tool gives you a broken process in a new tool.
Several vendor-leaning sources claim HubSpot is 30 to 50 percent lower on subscription alone. That may be true for your team, but test it against your own invoice rather than the claim.
Compare the total three-year cost of each option. Include the migration, overlap, onboarding, rebuilds and admin time, then set that against the subscription difference. If HubSpot wins on that total, move. If it does not, stay and fix the process first.
When a custom CRM beats a forced HubSpot fit
Some firms have processes that fit HubSpot poorly. Examples include quoting with complex pricing rules, client portals, multi-step approvals and pipelines tied closely to operations. Logistics, manufacturing, healthcare and real estate firms often have needs like these. Forcing them into HubSpot through custom objects and workarounds can cost more than a bespoke or hybrid build.
A hybrid is often the practical middle path. HubSpot can keep the marketing and contact side, while a purpose-built layer handles operational workflow. This is not right for everyone. It makes sense when the process is central to how you win and deliver work, and when configuration keeps fighting the way you operate.
If you are weighing this in Toronto, our guide to custom CRM development in Toronto compares costs, build versus buy and a self-updating pipeline. Our CRM development services cover both routes, and our custom software development team builds the bespoke option when it is the right fit. A short scoping call is the fastest way to find out which side of that line your process sits on.
What to do next with your Salesforce to HubSpot migration cost
Salesforce to HubSpot migration cost is set by scope, so start with the audit. Count your custom objects, integrations, automations and the reports leadership reads each week. Then price the seat fees over three years, add the overlap and admin time, and compare the total with what you pay today. If the numbers still favour HubSpot, ask for a written scope, fixed price and launch date before any work starts. If they do not, stay and fix the process first.
Ready to size your move? Book a 30-minute scoping call and we will review your data, count the cost drivers above and set out what is in and what is out before any work begins.